Logica 05.5 numerically controlled pad printing
machine for 1 – 2 – 3 – 4 – 5 – 6 colour printing.

Numerically controlled pad printing centre for multicolour printing.
Up to 6 movement axis easily programming.
Fully electrical operation.
Available in 3 versions different for printing force and speed.
Cingolo-carro-armato LOGICA 05.5


L05.5 gallery foto2.1
2 colours - Logica 05.5 to 2 colors
(oval 350 mm) with indexor
Mod. PRN990,axis correction
Mod. AC120, 5th axis for
rotating parts and safety crank.


Operation electric with numerical control
Printing force 4000 N (mod.Logica 05.5 and 05.5 SV)
5000 N (mod.Logica 05.5 s)
Max printing speed adjustable up to 1200 c/h (*) (mod.Logica 05.5 and 05.5 S)
adjustable up to 1700 c/h (*) (mod.Logica 05.5 SV)
Number of colours 1 - 2 - 3 - 4 - 5 - 6
Maximum dia. ink cup 195 mm mod. Logica 05.5 S and 05.5 SV 160 mm mod. Logica 05.5
X axes pad register +/- 20 mm
Vertical stroke 180 mm
Maximum pad height 220 mm
AC supply 380 V - triple phase - 50/60 Hz
Average consumption about 1500 W
Weight with indexer and safety guarding: about 1300 Kg
Sizes with indexer and safety guarding: about 2550 x 1600 x 2250 (h) mm

Note: All data refer to basic model

(*) The above mentioned printing speed is the max achievable and will reduce when the vertical pad stroke is increased or when delay times have been programmed into the cycle. The maximum printing speed also depends on the parts loading device.


Recommended for applications where there is a single fixture, they allow rapid alignment on more axis of the part to the print.
Single fixture linear transfers for multicolour printing on medium and large products.
Recommended for multicolour printing or when high production cadences are required. They can also be used for additional in-line processes.
Ideal for printing large images that don’t fit into ink cup size.
Multifixture linear transfers for multicolour printing on small and medium products or used for additional in-line processes.
Linear transfer with horizontal rotation axes, available in various dimensions. RECOMMENDED in standard configuration, for multi-colours with extra fixtures, for additional functions such as: pre and post treatment, loading and unloading products or when more than one machine is used on line.
Linear transfer with inclined working planes is also suitable for use fuxtures which, as in the tracked conveyor, run below the printing plane i. e. under the table. Also usable as the oval, flat conveyor, type MEG, but with higher number of fixtures and available in various dimensions. RECOMMENDED for multi-colours printing with additional functions to the printing phase, or for multi-stage loading.


All the mechanical movements are motorized via numerical control and lead screw, guarantee high precision and smooth working.
Manufactured from light alloy and special steel. The simple and robust construction was also conceived to guarantee a long life of working without maintenance.
The computerized numerical control ensures complete flexibility of operation and simplicity without compromise.
Setting up adjustments can be carried out via the numeric keyboard with alphanumeric display. Ability to freely position the keyboard, where most comfortable for the user.
Memory of all different work programs for easy changeover set up.
Automatic colours registering on x y r axes, for immediate start-up (optional).
Ability to print under the printing plate, allowing decoration in every position on the large sized objects.
Ability to print on different surface levels of the same object, adjusting easily the stroke through the keyboard.
Low power consumption, economical since compressed air is not required. It’s exclusive electric operation presents a considerable advantage compared to an equivalent pneumatic machine, a saving of more than 15.000 - 20.000 kw/h in a year can be achieved assuming one working shift per day.
Eco-friendly. Due to its available hermetic ink system preventing solvent evaporation.
Changeover time reduced to a few minutes, thanks to the considerations given in the design concept to apply ergonomic principles to the system.
Ergonomic design to easy access all mechanical parts.
Accurate movement of the support slide-table with adjustable height.