Logica 05 numerically controlled pad printing
machine for 1 – 2 – 3 – 4 – 5 colour printing.

Up to 5 movement axis easily programming.
Fully electrical operation.
Up to 2 colours dia. 160 mm
or 4 colours dia. 130 mm
or 5 colours dia. 90 mm
Cingolo-carro-armato LOGICA 05

GALLERY

L05 gallery foto2.1
2 colours -Logica 05 2 colours
(dia. 160 mm) with cross table Mod. TO200
and pad cleaning device Mod. PIC05

L05 gallery foto4.1
4 colours - Logica 05 4 colours
(dia. 90 mm) with indexer Mod. PS460
and cross table Mod. TO100

L05 gallery foto4.2
4 colours - Logica 05 4 colours
(dia. 130 mm) with indexer Mod. PRN610,
cross table Mod. TO100
and pads pre-drying device.

L05 gallery foto5.1
5 colours - Logica 05 5 colours
(dia. 90 mm) with indexer Mod. PRN610,
correction axes Mod. AC120, rotary table
Mod. TRCN 2.5, pads pre-drying
device and safety guarding.

TECHNICAL DATA

Operation electric with numerical control
Printing force 3000 N
Maximum printing speed adjustable up to 2100 c/h(*)
Number of colours 1 - 2 – 3 -4 - 5
Maximum dia. ink cup 160 mm
Standard ink cup sizes up to 2 dia. 160 mm, or 4 dia. 130 mm or 5 dia. 90 mm
Vertical stroke 115 mm (60 mm on cliché)
Maximum pad height 175 mm (100 mm with pad shuttle system)
AC supply 220/240 V - single phase - 50/60 Hz
Average consumption about 1300 W
Size and weight (basic model) 1050 x 1100 x h. 2050 mm - about 230 Kg

Note: All data refer to basic model

(*) The above mentioned printing speed is the max achievable and will reduce when the vertical pad stroke is increased or when delay times have been programmed into the cycle. The maximum printing speed also depends on the parts loading device.

OPTIONAL

CROSS TABLES
Recommended for applications where there is a single fixture, they allow rapid alignment on more axis of the part to the print.
SHUTTLE SYSTEMS
Suggested for 2 or 3 colour printing with a single support fixture. Ideal also for printing onto cylindrical surfaces. Recommend when moving the object under the pads gives difficulties
INDEXERS
Single fixture linear transfers for multicolour printing on medium and large products.
ROTARY TABLES
Recommended for multicolour printing or when high production cadences are required. They can also be used for additional in-line processes.
DOCTORING REFRESHER DEVICES
Ideal for printing large images that don’t fit into ink cup size.
AUTOMATIC PAD CLEANING DEVICES
They permit the pads cleaning cycle with programmable operating time.
OVAL FLAT CONVEYORS
Multifixture linear transfers for multicolour printing on small and medium products or used for additional in-line processes.

FEATURES

All the mechanical movements are motorized via numerical control, guarantee high precision providing complete flexibility of operation and simplicity without compromise.
Its exclusive electric operation presents a considerable advantage compared to an equivalent pneumatic machine.
Manufactured from light alloy and special steel.
Eco-friendly. Due to its available hermetic ink system preventing solvent evaporation.
Independent adjustment of speeds to each of the six strokes, ability to memorize the different and most important phases of the printing cycle.
Changeover time reduced to a few minutes, thanks to the considerations given in the design concept to apply ergonomic principles to the system.
Due to the mechanical design quality, a guaranteed smooth working function results in an extremely quiet action, thus allowing use in any environment.
Ability to print under the printing plate, allowing decoration in every position on the large sized objects.
The manufacturing it was also conceived to guarantee a long life of working without maintenance.
All adjustment functions can be carried out via the numeric keyboard with alphanumeric display.
Countdown function and memory of all different work programs for easy set up.
Ability to print on different surface levels of the same object, adjusting easily the stroke through the keyboard.