machine up to 8 colour printing.
Fully electrical operation.
5 colours dia. 250 mm 6 colours dia. 195 mm
7 colours dia. 160 mm 8 colours dia. 130 mm or mixed
|electric with numerical control
|Maximum printing speed
|adjustable up to 1200 c/h(*)
|Number of colours
|1 - 2 – 3 -4 - 5 - 6 - 7 - 8
|Maximum ink cup sizes
|Standard ink cup sizes
|up to 5 dia. 250 mm, or 6 dia. 195 mm or 7 dia. 160 mm or 8 dia. 130, or mixed
|X axes pads register
|+/- 40 mm
|Maximum pad height
|380/400 V - triple phase - 50/60 Hz
|about 1,3 KW
|Size and weight (basic model)
|1370 x 1820 x h. 2300 mm - about 1500 Kg
Note: All data refer to basic model
(*) The above mentioned printing speed is the max achievable and will reduce when the vertical pad stroke is increased or when delay times have been programmed into the cycle. The maximum printing speed also depends on the parts loading device.
Recommended for applications where there is a single fixture, they allow rapid alignment on more axis of the part to the print.
Single fixture linear transfers for multicolour printing on medium and large products.
Recommended for multicolour printing or when high production cadences are required. They can also be used for additional in-line processes.
Ideal for printing large images that don’t fit into ink cup size.
Multifixture linear transfers for multicolour printing on small and medium products or used for additional in-line processes.
Linear transfer with horizontal rotation axes, available in various dimensions. RECOMMENDED in standard configuration, for multi-colours with extra fixtures, for additional functions such as: pre and post treatment, loading and unloading products or when more than one machine is used on line.
Linear transfer with inclined working planes is also suitable for use fuxtures which, as in the tracked conveyor, run below the printing plane i. e. under the table. Also usable as the oval, flat conveyor, type MEG, but with higher number of fixtures and available in various dimensions. RECOMMENDED for multi-colours printing with additional functions to the printing phase, or for multi-stage loading.
|All the mechanical movements are motorized via numerical control, guarantee high precision providing complete flexibility of operation and simplicity without compromise.
|Its exclusive electric operation presents a considerable advantage compared to an equivalent pneumatic machine.
|Manufactured from light alloy and special steel.
|Eco-friendly. Due to its available hermetic ink system preventing solvent evaporation.
|Independent adjustment of speeds to each of the six strokes, ability to memorize the different and most important phases of the printing cycle.
|Changeover time reduced to a few minutes, thanks to the considerations given in the design concept to apply ergonomic principles to the system.
|Due to the mechanical design quality, a guaranteed smooth working function results in an extremely quiet action, thus allowing use in any environment.
|Ability to print under the printing plate, allowing decoration in every position on the large sized objects.
|The manufacturing it was also conceived to guarantee a long life of working without maintenance.
|All adjustment functions can be carried out via the numeric keyboard with alphanumeric display.
|Countdown function and memory of all different work programs for easy set up.
|Ability to print on different surface levels of the same object, adjusting easily the stroke through the keyboard.