Logica 08 numerically controlled pad printing.
machine up to 10 colour printing.

Numerically controlled pad printing centre,
for multicolour application,up to 10 colours
on different form and large size objects.
Fully electrical operation.
Up to 8 axis easily programmable.
Available in 2 different configurations:
Aligned pads LINEAR VERSION and
Radial pads DRUM VERSION

Cingolo-carro-armato LOGICA 08


Operation electric with numerical control
Printing force 30000 N
Maximum printing speed adjustable up to 700 c/h(*)/td>
Number of colours 1 - 2 – 3 -4 – 5 – 6 -7 - 8 -9 -10
Maximum ink cup sizes 350 mm
Standard ink cup sizes up to 4 dia. 350 mm, or 7 dia. 160 mm or 10 dia. 115 mm
Vertical stroke 160 mm
Maximum pad height 300 mm (100 mm with pad shuttle system)
AC supply 380/400 V - triple phase - 50/60 Hz
Average consumption 3 to 4 KW
Size and weight (basic model) 1050 x 1100 x h. 2050 mm - about 2000 Kg

Note: All data refer to basic model

(*) The above mentioned printing speed is the max achievable and will reduce when the vertical pad stroke is increased or when delay times have been programmed into the cycle. The maximum printing speed also depends on the parts loading device.


Recommended for applications where there is a single fixture, they allow rapid alignment on more axis of the part to the print.
Single fixture linear transfers for multicolour printing on medium and large products.
Recommended for multicolour printing or when high production cadences are required. They can also be used for additional in-line processes.
Ideal for printing large images that don’t fit into ink cup size.
Linear transfer with horizontal rotation axes, available in various dimensions. RECOMMENDED in standard configuration, for multi-colours with extra fixtures, for additional functions such as: pre and post treatment, loading and unloading products or when more than one machine is used on line.


All the mechanical movements are motorized via numerical control, guarantee high precision providing complete flexibility of operation and simplicity without compromise.
Its exclusive electric operation presents a considerable advantage compared to an equivalent pneumatic machine.
Manufactured from light alloy and special steel.
Eco-friendly. Due to its available hermetic ink system preventing solvent evaporation.
Independent adjustment of speeds to each of the six strokes, ability to memorize the different and most important phases of the printing cycle.
Changeover time reduced to a few minutes, thanks to the considerations given in the design concept to apply ergonomic principles to the system.
Due to the mechanical design quality, a guaranteed smooth working function results in an extremely quiet action, thus allowing use in any environment.
Ability to print under the printing plate, allowing decoration in every position on the large sized objects.
The manufacturing it was also conceived to guarantee a long life of working without maintenance.
All adjustment functions can be carried out via the numeric keyboard with alphanumeric display.
Countdown function and memory of all different work programs for easy set up.
Ability to print on different surface levels of the same object, adjusting easily the stroke through the keyboard.