Logica Micro II numerically controlled
pad printing machine up to 5 colour printing.
High mechanical cadence.
Fully electrical operation.
Maximum diameter ink cup 130 mm
Ideal for the installation on production lines or for special plants.
Cingolo-carro-armato Logica Micro II

TECHNICAL DATA

Operation electric with numerical control
Printing force 3850 N
Maximum printing speed adjustable up to 5000 c/h
Number of colours 1 - 2 – 3 -4 - 5
Maximum dia. ink cup 130 mm
Maximum ink cup sizes up to 5 dia. 90 mm or 4 dia. 115 mm or 3 dia. 130 mm
Vertical stroke 147 mm
Maximum pad height 120 mm
AC supply 220/240 V - single phase - 50/60 Hz
Average consumption about 600 W
Size and weight (basic model) 1150 x 1500 x h. 2200 mm – (model in the picture) About 525 Kg (model in the picture)

Note: All data refer to basic model

(*) The above mentioned printing speed is the max achievable and will reduce when the vertical pad stroke is increased or when delay times have been programmed into the cycle. The maximum printing speed also depends on the parts loading device.

OPTIONAL

CROSS TABLES
Recommended for applications where there is a single fixture, they allow rapid alignment on more axis of the part to the print.
INDEXERS
Single fixture linear transfers for multicolour printing on medium and large products.
ROTARY TABLES
Recommended for multicolour printing or when high production cadences are required. They can also be used for additional in-line processes.
AUTOMATIC PAD CLEANING DEVICES
They permit the pads cleaning cycle with programmable operating time.
OVAL FLAT CONVEYORS
Multifixture linear transfers for multicolour printing on small and medium products or used for additional in-line processes.
RECTILINEAR TRACKED CONVEYOR
Linear transfer with horizontal rotation axes, available in various dimensions. RECOMMENDED in standard configuration, for multi-colours with extra fixtures, for additional functions such as: pre and post treatment, loading and unloading products or when more than one machine is used on line.

FEATURES

All the mechanical movements are motorized via numerical control, guarantee high precision providing complete flexibility of operation and simplicity without compromise.
Its exclusive electric operation presents a considerable advantage compared to an equivalent pneumatic machine.
Manufactured from light alloy and special steel.
Eco-friendly. Due to its available hermetic ink system preventing solvent evaporation.
Independent adjustment of speeds to each of the six strokes, ability to memorize the different and most important phases of the printing cycle.
Changeover time reduced to a few minutes, thanks to the considerations given in the design concept to apply ergonomic principles to the system.
Due to the mechanical design quality, a guaranteed smooth working function results in an extremely quiet action, thus allowing use in any environment.
Ability to print under the printing plate, allowing decoration in every position on the large sized objects.
The manufacturing it was also conceived to guarantee a long life of working without maintenance.
All adjustment functions can be carried out via the numeric keyboard with alphanumeric display.
Countdown function and memory of all different work programs for easy set up.
Ability to print on different surface levels of the same object, adjusting easily the stroke through the keyboard.